Monolithics & castable

CASTABLES

PACMON ™

(High Strength & Abrasion Resistant Low / Ultra Low Cement Castables)

The range of Low Cement / Ultra Low Cement Castables are
ideal for applications requiring superior erosion resistance and
volume stability.
These are available with high density, lower porosity and
higher crushing strengths at all temperatures.

Low Cement Castables BD – 2.3 to 3 CCS – upto 1200 kg/cm2 Service Temp. : Upto 1700 C	PACMON LC-45
	PACMON LC-60
	PACMON LC-70
	PACMON LC-80
	PACMON LC-90
	PACMON LC-60 AS
	PACMON WR

Ultra Low Cement Castables BD – 2.3 to 3 CCS – upto 1200 kg/cm2 Service Temp. : Upto 1700 C	PACMON ULC-60
	PACMON LC-70
	PACMON LC-80
	PACMON LC-90

Self Flow Castables BD – 2.3 to 3 CCS – upto 1000 kg/cm2 Service Temp. : Upto 1700 C	PACMON-45
	PACMON-60
	PACMON-70
	PACMON-80
	PACMON-90

PACFLOW ™

(High Strength & Abrasion Resistant Self Flow Castables)

PACFLOW are self flowing castables which can be applied by
pouring or pumping to fill moulds or form work without
vibration.

They have low porosity, higher service temperatures & improved thermal shock resistance.

Ideal for quick installation in complicated locations as the material flows without the help of vibrations.

PACAST ™/PACTAB ™/PACRETE ™

(High / Medium Purity Dense Castables)

A wide range of dense castables in high & medium purity
varieties. These are used in various applications
by different industries.
Hydraulically bonded castables for high temperatures.
Based on alumino silicates, corundum & sintered aggregates.
Good impact strength.Minimum shrinkage.
High Resistance to abrasion.Excellent volume stability.
High purity Tabular Alumina Castables for stringent operating
conditions in Fertilizer, Refineries, Petrochemical industries.
These are ready to install refractories which develop superior
strengths on exposure to heat and under operating conditions.

High Purity Dense Castables BD – 2.1 to 2.75 CCS – upto 680 kg/cm2 Service Temp. : Upto 1750 C	PACAST-50
	PACAST-50 SPL
	PACAST-60
	PACAST-60 SPL
	PACAST-90
	PACTAB-94
	PACTAB-97

High Purity Gel Bonded Castables BD – 2.1 to 2.75 CCS – upto 1100 kg/cm2 Service Temp. : Upto 1750 C	PACAST GEL-50
	PACAST GEL-60
	PACAST GEL-80
	PACAST GEL-90

Medium Purity Dense Castables

BD – 2.1 to 2.5
CCS – upto 460 kg/cm2
Service Temp. : Upto 1450 C

PACREATE

PACREATE-HS

PACREATE-XL

Plastic & Ramming Mass BD – 2.1 to 2.7 CCS – upto 1000 kg/cm2 Service Temp. : Upto 1750 C	PACPLAST-45
	PACPLAST-60
	PACPLAST-70
	PACPLAST-80
	PACPLAST-90
	PACPLAST-45 SPL
	PACPLAST-60 SPL
	PACPLAST-70 SPL
	PACPLAST-80 SPL
	PACPLAST-90 SPL
	PACPLAST-60 HC

PACPLAST ™

(Plastic & Ramming Masses)

Refractory Plastics & Ramming Masses are monolithic
Refractory Plastics & Ramming Masses are monolithic
refractories, which develop good structural strength upon
exposure to heat.
Plastics are of semi-stiff consistency and are installed
primarily by pneumatic ramming.
Ramming mixes are similar to plastics but contain less
moisture, have less plasticity and can be placed by ramming
or tamping.

PROLITE ™

(Low & Medium Iron Insulating Castables)

A wide range of insulating castables in high & medium purity
varieties.
Minimum shrinkage and excellent volume stability.
Low Thermal Conductivity ensures minimum heat loss with
significant fuel savings.
Hydraulically setting, ready to install, these castables develop
superior strengths at operating temperatures.

Insulating Castables (Medium Iron) BD – 0.85 to 1.45 CCS – upto 95 kg/cm2 Service Temp. : Upto 1300 C	PROLITE-50
	PROLITE-55
	PROLITE-55 HS
	PROLITE-70
	PROLITE-80
	PROLITE-90

Insulating Castables (Low Iron) BD – 0.85 to 1.45 CCS – upto 95 kg/cm2 Service Temp. : Upto 1300 C	PROLITE-50 Li
	PROLITE-70 Li
	PROLITE-80 Li
	PROLITE-90 Li

Wear Resistant Castables

BD – 2.7
CCS – upto 2000 kg/cm2
Service Temp. : Upto 1200 C

PACWEAR-1000

PACWEAR ™

(Wear Resistant Castable)

This castable offers superior wear resistance against heavy oer osion at elevated temperatures upto 1200C.

Suitable for use in cements plants.

PACSIC ™

(Silicon Carbide based Castables

Silicon Carbide Castables

BD – 2.3 to 2.9
CCS – upto 1000 kg/cm2
Service Temp. : Upto 1600 C

PACSIC-35

PACSIC-70

Non Wetting Castables

BD – 2.6 to 2.9
CCS – upto 900 kg/cm2
Service Temp. : Upto 1650 C

ALUPAC-60 SPL

ALUPAC-70 SPL

ALUPAC ™

(Non-wetting Castables for Aluminium Industry)

A range of castables ideally suited for Aluminium melting and holding furnaces.
Exceptional Resistance to wetting by molten Aluminium alloys. This results in longer refractory life, cleaner alloys & lower costs.
Superior erosion resistance, volume stability & better thermal shock resistance.